Conventional TANACO PLASTIC PLUG SANITARY VALVES

Valve bodies and fittings are of #316 stainless steel, the most corrosion resistant stainless available and they are polished to a mirror finish.

The TANACO PLASTIC PLUG is solid throughout, heat resistant to 350° F., requires no lubrication, light in weight, nonabsorbent and will withstand considerable plant abuse.  It is chemically inert, nontoxic, tasteless and odorless.

Because the mating tapers of unlike materials do not gall or stick, this valve can be easily turned and sealed . Best of all, it is GUARANTEED NOT TO LEAK.

Two and thee-way valves with various end ports come in line sizes from 1 to 4 inches and are available for immediate delivery.

ACCESSORIES;
Where valves are turned frequently under pressure or installed so that it is difficult to reach the bottom wingnut, a TANACO FREE TURNING TIE NUT should be used. This replaces the standard washer and nut. Once set, the valve can be operated under pressure, by hand, without touching the Tie Nut, without unseating the plug and without leakage.

The Tie Nut prevents product getting between body and plug during turning. A TANACO PLASTIC bearing in the Tie Nut separates the clamping pressure of plug and body and line pressure lifts the plug slightly for free rotation.

These sanitary light-weight LEAK-PROOF CLOSURES of TANACO PLASTIC, with molded-in stainless steel threads and an FDA compliant white silicon gasket seal, are modern replacements for heavy end plates and hex nuts on threaded ferrules.

They cap any line, tank or valve port in 1" through 3" line sizes. Long lasting and unbreakable, they can be ordered with or without a 15" stainless chain and hook.